乙烯裂解炉整体模块化建造模式及优势

doi:10.3969/j.issn.1006-8805.2019.04.008

Petro-chemical Equipment Technology ›› 2019, Vol. 40 ›› Issue (4): 35-39,44.doi: 10.3969/j.issn.1006-8805.2019.04.008

• INDUSTRIAL FURNACE • Previous Articles Next Articles

Model and Advantages of Complete Modularized Construction of Ethylene Cracking Furnace

Liu Yinghua^{1^{, An Haiou²}}

1. Wison Engineering (China) Co., Ltd., Shanghai, 201210;
2. Zhejiang Petroleum & Chemical Co., Ltd., Zhoushan, Zhejiang, 316200

Received:2019-01-05 Accepted:2019-06-25 Online:2019-11-20 Published:2019-11-20

Abstract

Abstract: This paper analyzes and summarizes the whole process of complete modularized construction, transportation and installation of ethylene cracking furnace. It makes full elements comparison with on-site installation. The results indicate that complete modularized construction of ethylene plant cracking furnace is not only feasible in technical solution, but also has the advantages of shortening construction period, saving construction cost, reducing construction safety risks and controlling environmental pollution effectively. The construction method can be further optimized according to the capacity of each manufacturing plant. The complete modularized construction of cracking furnace is a new alternative construction mode.

Key words: cracking furnace, radiant section, convection section, complete modularization

Liu Yinghua, An Haiou. Model and Advantages of Complete Modularized Construction of Ethylene Cracking Furnace[J].Petro-chemical Equipment Technology, 2019, 40(4): 35-39,44.

[1]	Jiang Mingjing. Analysis on the Abnormality of Furnace Tube of Gas Cracking Furnace in Ethylene Plant [J]. Petro-chemical Equipment Technology, 2021, 42(2): 47-51,55.
[2]	Jiang Bingyang, Feng Bingyang, Yu Xi, Chang Yue. Overview of Cracking Furnace Steel Frame with Wall Panel [J]. Petrochemical Design, 2021, 38(1): 65-68.
[3]	Wang Junjie, Yang Fan, Liu Hui, Shang Yongfu, Zhang Wei. Analysis on the Corrosion Mechanism of Feed Elbow in Convection Section of Pyrolysis Furnace [J]. Petro-chemical Equipment Technology, 2021, 42(1): 49-52.
[4]	Li Zhiyuan, Luo Jiancheng, Ding Lu, Wang Junwei, Lv Xiaogang. Analysis and Adjustment of Factors Affecting NOx Generation in 4 # Cracking Furnace (10-F-104) [J]. Petrochemical Safety Technology, 2020, 36(6): 51-52.
[5]	He Xi’ou, Li Changli, Zhou Cong, Shao Chen, Li Jinke, Zhao Yonghua, Shen Hainyu. Development and Industrial Application of SINOPEC CBL Gas Cracking Furnace [J]. Ethylene Industry, 2020, 32(4): 5-9.
[6]	Wang Qiang, Zhang Le, Li Huaiqiang, Ma Guomin, Zhang Yong. Cause Analysis and Optimization Measures for Leakage of Furnace Tube in Convection Section of Cracking Furnace [J]. Ethylene Industry, 2020, 32(4): 48-50.
[7]	Yang Ke, Yang Fan, Wang Junjie, Guo Xingbin, Shi Changhong. Fracture Analysis of Tubes in HS-Ⅲ Cracking Furnace in Ethylene Plant [J]. Ethylene Industry, 2020, 32(4): 54-56.
[8]	Yang Fan, Liu Hui, Miao Zhuang, Liao Jun, Wu Shichang. Long-term Operation and Equipment Management of Cracking Furnace in 220 kt/a Ethylene Plant [J]. Petro-chemical Equipment Technology, 2020, 41(4): 63-66.
[9]	Jiang Pengfei, Su Weiyi, Luo Lingli, Gu Yang, Hong Kun. Problems in Long-Term Operation of Cracking Furnace and the Optimization Measures [J]. Ethylene Industry, 2020, 32(3): 22-28.
[10]	Dai Bing, Wang Ping, Wang Xiaorui, Yang Xue. Application of SCR Denitration Technology in Ethylene Cracking Furnace [J]. Ethylene Industry, 2020, 32(3): 29-34.
[11]	Lu Dan. Structural Design of Header Box in Ethylene Cracking Furnace [J]. Ethylene Industry, 2020, 32(3): 35-38.
[12]	Liu Man. Design and Failure Analysis of Radiant Section Lining in Cracking Furnace [J]. Ethylene Industry, 2020, 32(3): 42-45.
[13]	Li Delong. Research and Implementation of Energy Saving and Consumption Reduction Measures for Cracking Furnace in Ethylene Plant [J]. Ethylene Industry, 2020, 32(3): 46-49.
[14]	Chen Deming. Study on Thermal Efficiency of Cracking Furnace for 0.2 MTA Ethylene Plant [J]. Petro-chemical Equipment Technology, 2020, 41(2): 6-10.
[15]	Zhi Maoxuan. Simulation of Industrial Decoking Process for Ethylene Cracking Furnace [J]. Ethylene Industry, 2020, 32(2): 34-37.

Model and Advantages of Complete Modularized Construction of Ethylene Cracking Furnace

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0