基于ANSYS卧式容器支座布置优化

doi:10.3969/j.issn.1006-8805.2020.03.003

Petro-chemical Equipment Technology ›› 2020, Vol. 41 ›› Issue (3): 12-14.doi: 10.3969/j.issn.1006-8805.2020.03.003

• STATIC EQUIPMENT • Previous Articles Next Articles

Optimization of Supports Arrangement of Horizontal Vessel Based on ANSYS

Zhou Yongchun

SINOPEC Shanghai Engineering Co., Ltd., Shanghai, 200120

Received:2020-02-10 Accepted:2020-04-25 Online:2020-05-22 Published:2020-05-21

Abstract

Abstract: This paper studied the location dimension A of the saddle supports of horizontal vessel. By using finite element method, the axial stress, tangential shear stress and circumferential stress of specific sections were calculated under different A values. According to the calculation results, the stress changes with A values were analyzed. Then the method of adjusting A values to reduce the stress in the specified range was summarized. This provides reference for supports locating of horizontal vessels.

Key words: horizontal vessel, saddle, finite element analysis, location dimension, stress

Zhou Yongchun. Optimization of Supports Arrangement of Horizontal Vessel Based on ANSYS[J].Petro-chemical Equipment Technology, 2020, 41(3): 12-14.

[1]	Liu Dianru, Huang Jingfeng, Gao Nan, Li Xiaopeng, Wang Tianting. Cause Analysis and Countermeasures for Cracking of High Pressure Heat Exchanger in Hydrogenation Unit [J]. Petro-chemical Equipment Technology, 2021, 42(2): 16-19.
[2]	Xu Wei. An Attempt to Assess the Risk of Serious Roundness Outliers by Finite Element Analysis of the Whole Tower [J]. Petrochemical Design, 2021, 38(1): 47-51.
[3]	Zhang Junwen. Study on Start-up and Commissioning of Steam Turbine [J]. Petrochemical Design, 2021, 38(1): 52-54.
[4]	Meng Shi. Drum Riser Piping Design for Reformer of Hydrogen Plant [J]. Petrochemical Design, 2021, 38(1): 59-61.
[5]	Ji Bingyi. Analysis and Optimization of Prestressing System for Outer Wall of Large-scale LNG Storage Tank [J]. Petrochemical Design, 2020, 37(4): 34-37.
[6]	Zhang Bi. Cause Analysis on Blade Fracture of 50 MW Steam Turbogenerator Unit [J]. Petro-chemical Equipment Technology, 2020, 41(2): 14-17.
[7]	Hu Chao, Yang Jingjie, Wu Zhongkun, Han Rongxin. Cold Insulation Safety and Effect Evaluation for Cryogenic Pipelines in LNG Terminal [J]. Petrochemical Design, 2020, 37(2): 44-47.
[8]	Ji Zhanghong. Cause Analysis on the Cracking of T-Welded Joint in a 10×104 m3 Storage Tank [J]. Petro-chemical Equipment Technology, 2020, 41(1): 33-39.
[9]	Liang Bin, Rui Leshun, Cui Qiang. Cause Analysis on the Fracture of Heat Exchange Tube in Methanol Synthesis Reactor [J]. Petro-chemical Equipment Technology, 2020, 41(1): 51-53.
[10]	Chen Sunyi, Li Zhihai, Zhong Jingshan. Structure Design of Diaphragm Seal in the High-pressure Channel of Fifth-section After-cooler of Primary Compressor [J]. Petro-chemical Equipment Technology, 2020, 41(1): 54-60.
[11]	Zhang Junwen. Study on the Interaction of Header Design and Piping Design of Air Cooler [J]. Petro-chemical Equipment Technology, 2019, 40(6): 8-11.
[12]	Ma Hongjie. Analysis on Corrosion Cracking of Tube Bundles in 0Cr18Ni10Ti Stainless Steel Heat Exchangers [J]. Petro-chemical Equipment Technology, 2019, 40(5): 10-13.
[13]	Ma Litao. Analysis on the Crack Failure Causes of Column Tray of the Atmospheric Tower in CDU & VDU and the Treatment [J]. Petro-chemical Equipment Technology, 2019, 40(5): 14-17.
[14]	Fang Xiaofeng, Huang Junfeng, Li Qinglin. Saddle Force Analysis of Three-saddle Vessels under Gravitational Load [J]. Petro-chemical Equipment Technology, 2019, 40(5): 25-29.
[15]	Gao Xing, Wang Du, Chen Wenfei, Qian Shengjie, Zou Bin, Li Liubo. Defect Analysis and Safety Assessment of Reflux Tank in PTA Plant [J]. Petro-chemical Equipment Technology, 2019, 40(5): 62-66.

Optimization of Supports Arrangement of Horizontal Vessel Based on ANSYS

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0