炼油装置典型冷换设备腐蚀统计与成因分析

doi:10.3969/j.issn.1006-8805.2020.04.008

Petro-chemical Equipment Technology ›› 2020, Vol. 41 ›› Issue (4): 37-42.doi: 10.3969/j.issn.1006-8805.2020.04.008

• CORROSION AND PROTECTION • Previous Articles Next Articles

Corrosion Statistics and Cause Analysis of Typical Heat Exchange Equipment in Refining Units

Wang Ning¹, Sun Liang², Hou Yanhong², Duan Yongfeng¹, Yu Fengchang¹

1. SINOPEC Engineering Group Luoyang R & D Center of Technologies, Luoyang, Henan, 471003;
2. CNOOC Huizhou Petrochemicals Company Limited, Huizhou, Guangdong, 516086

Received:2020-02-24 Accepted:2020-06-25 Online:2020-07-13 Published:2020-07-13

Abstract

Abstract: Heat exchanger device is the most widely used equipment in refining and chemical enterprises. The problem of corrosion leakage is the main hidden danger that troubles the long-term safe operation of oil refining units. Based on the corrosion cases of the exchanger in a refinery during one operation cycle and overhaul period, the exchanger corrosion was statistically analyzed from the aspects of corrosion types, corrosion locations and corrosion causes. And an in-depth study was conducted on the causes of corrosion and the main factors leading to corrosion. The anti-corrosion measures for heat exchange equipment were optimized from such aspects as material selection, manufacturing, operation control, and circulating water management. These provide useful reference for the corrosion protection of heat exchange equipment in refining and chemical enterprises.

Key words: refining unit, heat exchange equipment, circulating water, corrosion

Wang Ning, Sun Liang, Hou Yanhong, Duan Yongfeng, Yu Fengchang. Corrosion Statistics and Cause Analysis of Typical Heat Exchange Equipment in Refining Units[J].Petro-chemical Equipment Technology, 2020, 41(4): 37-42.

References

[1] 袁晴棠. 中国劣质原油加工技术进展与展望[J]. 当代石油石化，2007，15（12）：1-6.
[2] 于凤昌，段永锋. 原油高温腐蚀评价及预测技术的研究进展[J]. 材料保护，2013，46（6）：55-59.
[3] 张燕来. 炼油装置循环水冷却器腐蚀原因分析[J]. 安全、健康和环境，2013，13（8）：32-34.
[4] 胥聪敏，张耀亨，程光旭，等. 国外炼油厂换热设备腐蚀研究现状及发展动态[J]. 石油化工设备，2005，34（1）：41-46.
[5] 杨锋平，赵新伟，罗金恒，等. 换热器管束完整性评价技术研究及应用现状[J]. 压力容器，2012，29（3）：43-48.
[6] 赵敏，康强利，张郡. 炼化装置热交换器腐蚀与防护[J]. 石油化工设备，2011，40（6）：89-92.
[7] 王喜月. 炼油装置冷换设备腐蚀与防护[J]. 石油化工腐蚀与防护，2007，24（1）：56-58.
[8] 曾斌. 炼油装置冷换设备用材评估[J]. 石油化工腐蚀与防护，2004，21（4）：57-60.
[9] 胡建洲. 列管式冷换设备管束失效原因分析及质量控制[J]. 天然气与石油，2017，35（5）：77-81.
[10] 崔轲龙，马红杰. 炼化装置换热器泄漏原因调查与分析[J]. 全面腐蚀控制，2019，33（12）：27-30.
[11] API. Risk-based Inspection Methodology: API RP 581—2016[S]. Washington D.C.：API,2016.
[12] API. Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries: API RP 939-C—2009[S]. Washington D.C.：API,2009.
[13] 中华人民共和国工业和信息化部. 高酸原油加工装置设备和管道设计选材导则：SH/T 3129—2012[S]. 北京：中国石化出版社，2013.
[14] 中华人民共和国工业和信息化部. 高硫原油加工装置设备和管道设计选材导则：SH/T 3096—2012[S]. 北京：中国石化出版社，2013.
[15] 中华人民共和国住房和城乡建设部，中华人民共和国国家质量监督检验检疫总局. 工业循环冷却水处理设计规范：GB/T 50050—2017[S]. 北京：中国计划出版社，2017.
[16] 中国石油化工集团公司. 水务管理技术要求: 第2部分：循环水：Q/SH 0628.2—2014[S]. 北京：化学工业出版社，2014.
[17] 文朋. 浅谈循环水冷却器腐蚀与防护[J]. 中国石油和化工标准与质量，2017，37（14）：129-130.
[18] 王德武. 碳钢水冷器的腐蚀结垢与涂料防护[J]. 腐蚀与防护，1999，20（10）：453-455.
[19] 王亮，刘守檩，汪海波，等. 牺牲阳极保护技术在水冷器上的应用[J]. 全面腐蚀控制，2017，31（11）：47-49.
[20] 王巍. 阴极保护在水冷器上的应用[J]. 石油化工设计，2010，27（2）：31-33，36.

Corrosion Statistics and Cause Analysis of Typical Heat Exchange Equipment in Refining Units

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0

[1]	Bao Zhenyu, Zhang Jie, Wang Tuanliang, Duan Yongfeng. Corrosion Mechanism and Case Analysis of Desulfurization Unit in Natural Gas Purification Plant [J]. Petro-chemical Equipment Technology, 2021, 42(2): 56-61.
[2]	Luo Jianhu. On the Failure Causes of Steam-Methanol Superheater in SHMTO Process [J]. Petro-chemical Equipment Technology, 2021, 42(1): 36-41.
[3]	Li Yuge, Pan Xiankui, Chen Xiaolin, Tao Ping, Wang Chunguang, Lin Haiping. Corrosion Prevention of Stainless Steel in High Sulfur Environment of Desulfurization Unit [J]. Petro-chemical Equipment Technology, 2021, 42(1): 45-48.
[4]	Wang Junjie, Yang Fan, Liu Hui, Shang Yongfu, Zhang Wei. Analysis on the Corrosion Mechanism of Feed Elbow in Convection Section of Pyrolysis Furnace [J]. Petro-chemical Equipment Technology, 2021, 42(1): 49-52.
[5]	Wu Zhenhua. Application of Top-Circulating-Oil Desalination Technology in Delayed Coking Fractionators to Reduce Safety Risks of the Units [J]. Petrochemical Safety Technology, 2020, 36(6): 29-31.
[6]	Liu Guangsha, He Yuan. Wear Analysis and Protection of Quench Water Pump in MTO Plant [J]. Petro-chemical Equipment Technology, 2020, 41(6): 52-54,66.
[7]	Ding Mingwei. Application of “HPG” – High Performance Gasket in Petrochemical Industry [J]. Petrochemical Safety Technology, 2020, 36(5): 35-37.
[8]	Heng Lei, Liu Qingjie. Improvement and Optimization of Refining Circulating Water Quality [J]. Petrochemical Safety Technology, 2020, 36(4): 38-41.
[9]	Wang Qiang, Zhang Le, Li Huaiqiang, Ma Guomin, Zhang Yong. Cause Analysis and Optimization Measures for Leakage of Furnace Tube in Convection Section of Cracking Furnace [J]. Ethylene Industry, 2020, 32(4): 48-50.
[10]	Yang Ke, Yang Fan, Wang Junjie, Guo Xingbin, Shi Changhong. Fracture Analysis of Tubes in HS-Ⅲ Cracking Furnace in Ethylene Plant [J]. Ethylene Industry, 2020, 32(4): 54-56.
[11]	Wang Chaoping. Analysis on the Corrosion Fatigue Fracture of Tube Bundle in Highlow Pressure Hydrogenation Heat Exchanger and the Improvement Measures [J]. Petro-chemical Equipment Technology, 2020, 41(4): 43-47.
[12]	Chen Shengmiao. Corrosion Analysis and Material Selection of Heat Exchanger for Heat High-pressure Separation Gas/Mixed Hydrogen [J]. Petro-chemical Equipment Technology, 2020, 41(4): 48-53.
[13]	Sun Di, Wang Zeliang, Zhang Yili, Zhang Yuanqi, Zhang Weixiu. Corrosion Protection Design of Petrochemical Concrete Buildings [J]. Petrochemical Design, 2020, 37(3): 9-11.
[14]	Zhang Hongkui. Case Analysis on the Inspection and Overhaul of Refined Oil Storage Tanks [J]. Petro-chemical Equipment Technology, 2020, 41(3): 46-49.
[15]	Huang Mengqi. Development of a New High-efficiency Gas-gas Mixer [J]. Petro-chemical Equipment Technology, 2020, 41(2): 11-13.