在用制氢转化炉提高热效率方法探索

doi:10.3969/j.issn.1006-8805.2019.04.010

Petro-chemical Equipment Technology ›› 2019, Vol. 40 ›› Issue (4): 45-49.doi: 10.3969/j.issn.1006-8805.2019.04.010

• INSPECTION AND MAINTENANCE TECHNOLOGY • Previous Articles Next Articles

Exploration of Thermal Efficiency Improving Method for Hydrogen Production Reforming Furnace in Use

Sun Yuantian¹, Deng Huaqiang¹, Dong Xia², Wang Wenqi², Cheng Xiangfeng³

1.SINOPEC Qilu Company, Zibo, Shandong, 255434;
2.Shandong Qilu Petrochemical Engineering Co., Ltd., Zibo, Shandong, 255400;
3. Luoyang Chaolan Energy Saving Technology Co., Ltd., Luoyang, Henan, 471003

Received:2019-04-04 Accepted:2019-06-25 Online:2019-07-15 Published:2019-11-20

Abstract

Abstract: According to the structural characteristics of hydrocarbon-steam reformer for hydrogen plant, some problems restricting the improvement of its thermal efficiency are analyzed and discussed. Some preliminary explorations and attempts are made to eliminate the air leakage in the reformer system. Special sealing structure is adopted to reduce the oxygen content in the flue gas from the reforming furnace and improve the thermal efficiency of the reformer.

Key words: hydrogen production plant, reforming furnace, radiant section, convection section, oxygen content, thermal efficiency

Sun Yuantian, Deng Huaqiang, Dong Xia, Wang Wenqi, Cheng Xiangfeng. Exploration of Thermal Efficiency Improving Method for Hydrogen Production Reforming Furnace in Use[J].Petro-chemical Equipment Technology, 2019, 40(4): 45-49.

[1]	Wang Junjie, Yang Fan, Liu Hui, Shang Yongfu, Zhang Wei. Analysis on the Corrosion Mechanism of Feed Elbow in Convection Section of Pyrolysis Furnace [J]. Petro-chemical Equipment Technology, 2021, 42(1): 49-52.
[2]	Wang Qiang, Zhang Le, Li Huaiqiang, Ma Guomin, Zhang Yong. Cause Analysis and Optimization Measures for Leakage of Furnace Tube in Convection Section of Cracking Furnace [J]. Ethylene Industry, 2020, 32(4): 48-50.
[3]	Yang Ke, Yang Fan, Wang Junjie, Guo Xingbin, Shi Changhong. Fracture Analysis of Tubes in HS-Ⅲ Cracking Furnace in Ethylene Plant [J]. Ethylene Industry, 2020, 32(4): 54-56.
[4]	Ren Chongxin, Ye Minglu, Wang Xiwang, Dong Zhiquan, Kang Hongcai. Energy Saving Analysis of Mechanical Coke Cleaning and Chemical Cleaning for Cracking Furnace [J]. Ethylene Industry, 2020, 32(3): 39-41.
[5]	Liu Man. Design and Failure Analysis of Radiant Section Lining in Cracking Furnace [J]. Ethylene Industry, 2020, 32(3): 42-45.
[6]	Chen Deming. Study on Thermal Efficiency of Cracking Furnace for 0.2 MTA Ethylene Plant [J]. Petro-chemical Equipment Technology, 2020, 41(2): 6-10.
[7]	Li Shuge. RESEARCH ON PLOT PLAN OF HYDROGEN PRODUCTION PLANT [J]. Petrochemical Safety Technology, 2019, 35(6): 33-36.
[8]	Zhang Qian, Chen Sunyi, Liu Heng. Force Analysis of Protection Tie Rods in Convection Section Module of Heater [J]. Petro-chemical Equipment Technology, 2019, 40(4): 27-34.
[9]	Liu Yinghua, An Haiou. Model and Advantages of Complete Modularized Construction of Ethylene Cracking Furnace [J]. Petro-chemical Equipment Technology, 2019, 40(4): 35-39,44.
[10]	Zhao Yonghua. Application of CBL Energy Saving Technology in Revamping of Cracking Furnace [J]. Ethylene Industry, 2019, 31(3): 34-36.
[11]	Shi Baoming. Application of low NO_x burner in SSTPC ethylene cracking furnace [J]. Ethylene Industry, 2019, 31(2): 52-54.
[12]	Xue Kui, Li Huaiqiang,Ma Guomin,Yang Zhinan,Zhou Jian. Chemical Cleaning Practice of Linde Pyracrack1-1 Cracking Furnace [J]. Ethylene Industry, 2018, 30(4): 60-64.

Exploration of Thermal Efficiency Improving Method for Hydrogen Production Reforming Furnace in Use

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 12

Metrics

Comments

Recommended 0