大型急冷油旋液分离器的研发与应用

doi:10.3969/j.issn.1006-8805.2023.06.002

石油化工设备技术 ›› 2023, Vol. 44 ›› Issue (6): 9-12.doi: 10.3969/j.issn.1006-8805.2023.06.002

• 静设备 • 上一篇

大型急冷油旋液分离器的研发与应用

杨玉奇¹,张金彦²,王俭革³

1. 北京航天石化技术装备工程有限公司,北京 100176；
2. 中国石化工程建设有限公司,北京 100101；
3. 中国石化中原石油化工有限责任公司,河南濮阳 457000

收稿日期:2023-09-22 接受日期:2023-10-31 出版日期:2023-11-15 发布日期:2023-11-17
作者简介:杨玉奇,男,2010年毕业于哈尔滨工业大学动力机械及工程专业,工学硕士,主要从事流体机械设计研发方面的工作,研究员。
基金资助:
中国石油化工集团公司（批准号：JKC-2010-01）资助的课题

R&D and Application of Large-scale Quench Oil Hydrocyclone

Yang Yuqi¹, Zhang Jinyan², Wang Jiange³

1. Beijing Aerospace Petrochemical Technology and Equipment Engineering Co., Ltd., Beijing, 100176;
2. SINOPEC Engineering Incorporation, Beijing, 100101;
3. SINOPEC Zhongyuan Petrochemical Corp. Ltd., Puyang, Henan, 457000

Received:2023-09-22 Accepted:2023-10-31 Online:2023-11-15 Published:2023-11-17

摘要/Abstract

摘要： 针对百万吨乙烯装置中急冷油与焦粒固液分离难题,采用模拟软件对直径为2 m的大型急冷油旋液分离器进行了优化设计,并对设备内部流场、性能进行了数值模拟分析,同时对设备进行了变工况特性研究,并在典型工况下将实际运行参数与数值模拟结果进行了对比。结果显示,实际运行参数与数值模拟结果一致,说明该设计方法具有很强的工程实用价值。

关键词: 急冷油, 大型旋液分离器, 数值模拟, 工程应用

Abstract: Aiming at the problem of solid-liquid separation of quench oil and coke particles in a million ton ethylene plant, simulation software was used to optimize the design of large-scale quench oil hydrocyclone with the diameter of 2 meters and the internal flow field and performance of the cyclone were also analyzed by numerical simulation. The large-scale hydrocyclone with the above optimized design has been applied in a million-ton ethylene plant successfully. Combining with the actual application, this paper carried out a study on the characteristics of the equipment under variable operating conditions, and compared the actual operating parameters with the numerical simulation results under the designed operating conditions. The results show that the actual operating parameters were consistent with the numerical simulation results, which indicates that the design method is of great practical value for engineering.

Key words: quench oil, large-scale hydrocyclone, numerical simulation, engineering application

杨玉奇,张金彦,王俭革. 大型急冷油旋液分离器的研发与应用[J]. 石油化工设备技术, 2023, 44(6): 9-12.

Yang Yuqi, Zhang Jinyan, Wang Jiange. R&D and Application of Large-scale Quench Oil Hydrocyclone[J]. Petro-chemical Equipment Technology, 2023, 44(6): 9-12.

参考文献

［1］ YANG I H, SHIN C B, KIM T H. A Three-Dimensional Simulation of a Hydrocyclone for the Sludge Separation in Water Purifying Plants and Comparison with Experimental Data[J]. Minerals Engineering, 2004,17(5): 637-641.
［2］ NEESSE T, DUECK J. Dynamic Modeling of the Hydrocyclone[J]. Minerals Engineering, 2007,20(4): 380-386.
［3］ EVANS W K, SUKSANGPANOMRUNG A, NOWAKOWSKI A F. The Simulation of the Flow within a Hydrocyclone Operating with an Air Core and with an Inserted Metal Rod[J]. Chemical Engineering Journal, 2008,143(1/3): 51-61.
［4］化学工业部教育培训中心. 液相非均一系分离[M]. 北京：化学工业出版社,1997：65.
［5］ OLSON T J, VAN OMMEN R. Optimizing Hydrocyclone Design Using Advanced CFD Model[J]. Minerals Engineering, 2004, 17(5): 713-220.
［6］ RIETEMA K. Performance and Design of Hydrocyclones I: General Considerations[J]. Chemical Engineering Science, 1961,15(3-4）: 298-301.
［7］ VAN DUIJN G, RIETEMA K. Performance of a Large-Cone-Angle Hydrocyclone I: Hydrodynamics[J]. Chemical Engineering Science, 1983,38(10): 1651-1661.
［8］ KELSALL D F. A Study of the Motion of Solid Particles in a Hydraulic Cyclone[J]. Transactions of Institution of Chemical Engineers, 1952(30): 87-103.
［9］ VIEIRA L G M,DAMASCENO J J R,BARROZO M A S. Improvement of Hydrocyclone Separation Performance by Incorporating a Conical Filtering Wall[J]. Chemical Engineering and Processing, 2010, 49(5): 460-467.
［10］HAIDER A, LEVENSPIEL O. Drag Coefficient and Terminal Velocity of Spherical and Nonspherical Particles[J]. Powder Technology, 1989, 58(1): 63-70.
［11］DELGADILLO J A,RAJAMANI R K. Exploration of Hydrocyclone Designs Using Computational Fluid Dynamics[J]. International Journal of Mine-ral Processing, 2007, 84(1-4): 252-261.
［12］ANSYS Inc. Fluent 6.3.26 Users Guide[M]. USA: ANSYS Inc, 2008: 22.

[1]	孙立潮,赵承志,佀闻,张翔,栾德玉. 折流板间距对换热器换热性能的影响[J]. 石油化工设备技术, 2023, 44(5): 13-17.
[2]	郭志芳，张晓慧，李方遒，于真真，密晓光. 基于超临界天然气的PCHE流动传热特性数值模拟[J]. 石油化工设备技术, 2023, 44(2): 7-12.
[3]	杨玉奇. 乙烯装置急冷油除焦系统设计方案[J]. 乙烯工业, 2023, 35(1): 12-14.
[4]	谷长超. 烟风道结构优化设计的探讨[J]. 石油化工设计, 2023, 40(1): 21-25.
[5]	孟振亮. 加热炉出口管线内气液流场的数值模拟研究[J]. 石油化工设备技术, 2022, 43(5): 28-34.
[6]	郭力实, 马国民, 周尖, 白雪, 杨志飞. 急冷油系统减黏塔的运行及效果分析[J]. 乙烯工业, 2022, 34(4): 23-25.
[7]	唐诚，宋海霞. 百万吨/年乙烯装置急冷油泵前过滤器滤芯改造[J]. 石油化工设备技术, 2022, 43(4): 59-61,66.
[8]	潘伟亮, 钟丰平, 姚远, 钱青江, 张亚彬. 套筒式调节阀结构优化与流量特性数值模拟研究[J]. 石油化工设计, 2022, 39(3): 29-33.
[9]	苏鹤昉. 急冷油过滤器运行存在的问题及技术改造[J]. 乙烯工业, 2022, 34(2): 43-48.
[10]	郭建章, 张岚冰, 张文倩. 基于双旋流的油泥分离器数值模拟[J]. 石油化工设备技术, 2022, 43(1): 19-23.
[11]	王艳丽. 二甲苯塔重沸炉F401低氮燃烧器的结构改进[J]. 石油化工设备技术, 2022, 43(1): 40-45，51.
[12]	袁波, 张文超, 刘岱滨, 徐俊风. 乙烯装置急冷油系统稳定运行分析 [J]. 乙烯工业, 2022, 34(1): 35-39.
[13]	刘真. 埕岛油田油气水三相分离器油堰板高度优化[J]. 石油化工设备技术, 2021, 42(6): 30-34.
[14]	林玉娟，王志伟，高东. 复合材料CNG气瓶充气温升的数值模拟[J]. 石油化工设备技术, 2021, 42(5): 22-28.
[15]	张凯. 乙烯装置急冷油循环泵轴承故障原因分析[J]. 乙烯工业, 2021, 33(4): 11-16.

大型急冷油旋液分离器的研发与应用

R&D and Application of Large-scale Quench Oil Hydrocyclone

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0