石油化工设备技术 ›› 2020, Vol. 41 ›› Issue (5): 26-30.doi: 10.3969/j.issn.1006-8805.2020.05.006

• 工业炉 • 上一篇    下一篇

降低加热炉氮氧化物排放设计方案研究

薄建民1,白婧2,袁睿3   

  1. 1. 惠生工程(中国)有限公司北京分公司,北京 100102;
    2. 北京石油化工学院机械工程学院,北京 102617;
    3. 惠生工程(中国)有限公司,上海 201210
  • 收稿日期:2020-05-19 接受日期:2020-08-25 出版日期:2020-09-25 发布日期:2020-09-25
  • 作者简介:薄建民,男,1988年毕业于辽宁石油化工大学(原抚顺石油学院)化工机械专业,学士,主要从事石化工业炉方面的设计、施工及管理工作,高级工程师。Email:bojianmin@wison.com

Research on Design Scheme of Reducing NOx Emissions from Furnace

Bo Jianmin1, Bai Jing2, Yuan Rui3   

  1. 1. Wison Engineering (China) Co., Ltd. Beijing Branch, Beijing, 100102;
    2. School of Mechanical Engineering, Beijing Institute of Petrochemical Technology, Beijing, 102617;
    3. Wison Engineering (China) Co., Ltd., Shanghai, 201210
  • Received:2020-05-19 Accepted:2020-08-25 Online:2020-09-25 Published:2020-09-25

摘要: 氮氧化物(NOx)为大气污染物,对人类健康、生态环境危害极大且很难处理。某厂化工加热炉氮氧化物排放超标严重,必须进行改造。文章研究了加热炉氮氧化物(NOx)的生成机理和降低其排放的技术手段,根据实际工程项目经验及对现役加热炉的具体情况分析,提出了可行的改造方案。方案在实现氮氧化物排放达标基础上,可保证设备长周期稳定运行。

关键词: 加热炉, 氮氧化物, 低氮燃烧器, SCR

Abstract: Nitrogen oxides (NOx) are atmo-spheric pollutants which are extremely harmful to human health and ecological environment. And it's difficult to treat NOx. The nitrogen oxide emissions of a chemical furnace in a factoryexceed the standardseriously and must berevamped. This paperstudies the formation mechanism of nitrogen oxides (NOx) of furnace and the technical measures to reduce its emissions. According to the practical engineering project experience and the analysis on the specific conditions of furnace in-service, the paper proposes a feasible revamp scheme. On the basis of achieving compliance with nitrogen oxide emission standards, the scheme can ensure long-term stable operation of the equipment.

Key words: furnace, nitrogen oxide/Nox, low-NOx burner, selective catalytic reduction/SCR