石油化工设备技术 ›› 2019, Vol. 48 ›› Issue (3): 10-12.doi: 10.3969/j.issn.1006-8805.2019.03.003

• 静设备 • 上一篇    下一篇

基于传热计算的低温储罐吸阀冬季可靠性分析

刘罡   

  1. 中国石化工程建设有限公司,北京 100101
  • 收稿日期:2019-02-18 接受日期:2019-04-25 出版日期:2019-06-13 发布日期:2019-06-13
  • 作者简介:刘罡,男,2008年毕业于清华大学化学工程与技术专业,主要从事乙烯、煤化工工程开发与设计工作,高级工程师。Email:liugang@sei.com.cn

Analysis on the Reliability of Cryogenic Tank Suction Valve in Winter Based on Heat Transfer Calculation

Liu Gang   

  1. SINOPEC Engineering Incorporation, Beijing, 100101
  • Received:2019-02-18 Accepted:2019-04-25 Online:2019-06-13 Published:2019-06-13

摘要: 研究基于传热基本原理,对中国北方某低温乙烯储罐顶部吸阀伸出管道在冬季条件下的管端温度进行了数学建模与计算分析,同时结合当地大气情况分析了在极端情况下吸阀管道是否会出现结冰问题而影响工作可靠性,计算结果显示:在设计合适的伸出长度下,即使完全忽略日照、罐壁热传导等热量输入因素,吸阀管道仍可以保证不会出现结冰情况,可靠性可以得到保证。

关键词: 乙烯低温储罐, 吸阀, 传热, 结冰, 可靠性

Abstract: Based on the basic principles of heat transfer, this paper carries out mathematical modeling and computational analysis on the temperature at the end of the suction valve pipeline at the top of a cryogenic ethylene storage tank in northern China in winter. By combining with the local atmospheric conditions, this paper analyzes whether the suction valve pipeline will freeze in extreme conditions, which may affect the reliability of suction valve. The calculation results indicate that even the heat input factors such as sunshine and heat conduction are fully ignored, the suction valve pipeline can still ensure that there will be no icing, and the reliability of the suction valve can be guaranteed with the designed appropriate extended length.

Key words: ethylene cryogenic storage tank, suction valve, heat transfer, freezing, reliability